Case Study
The American Plastic Solution’s Medical Intubation Shield is easy to maneuver over a patient’s head and shoulders. With this design, only the arms of the medical professional are required to pass through the shield body, keeping the health care professional and the patient safe from contamination. Our Clear Acrylic Intubation Shield/Box is revised from an original design by Dr. Hsien Yung Lai. As a leading manufacturer of custom plastic solutions, we have enhanced the Intubation Box design with increased stability and durability, adding 2'' wide X 3/8'' thick clear acrylic rails along the bottom side edges of the shield/box. In addition, comfort was also taken into consideration. We bullnose the inner edges of the 5” diameter armholes so they are smooth to human touch and movement. We also flame polish all human contact edges so they are smooth to the touch These Protective Intubation Shields measure 21" wide X 19-3/4" tall X 16-1/4" deep and are made from 1/4" thick clear acrylic sheet. After each intubation procedure, the shield/box can be cleaned thoroughly with 70% alcohol or bleach before use on the next patient.
Specifications:
Shield | 1/4” Thick Clear Acrylic |
Dimensions | 21” Wide X 19-3/4” Deep X 16-1/4“ Tall |
Access Holes | 5” Diameter |
Estimated fulfillment time | Immediate shipment |
Cleaning Instructions:
Please use the following products to disinfect or sanitize our intubation shields:
- Steriplex SD
- Safetec Surface Wipes
- Perodox RTU
- Prosat Sterile Wipes
- Hydrogen Peroxide (pharmacy grade)
- Bleach (Household Grade)
- Isopropyl Alcohol (diluted with 30% water)